The Movalube grease gun is made to withstand vibrations and shocks, snow and ice. It takes the driving force it needs for lubrication from the hydraulics of the device being lubricated. The lubrication system, for example, lubricates the rear loader every time the lift is used. This way, timers and circuit boards are not needed. Because of this, Movalube is also suitable for VAK / ADR transports!
Movalube is an automatic lubrication system that can easily be expanded to also lubricate the joints and bearings of the shoulder pins. It is a good and inexpensive way to take care of the condition of the joints of the rotating shafts.
In the Mova system, the shoulder pins are lubricated, for example, in connection with the use and lubrication of the kick, hook device or tail lift, so you don't have to worry about lubrication yourself.
Movalube is the best choice for rear lifters because it was originally developed for them. The location of the car's base is exceptionally difficult due to the slush, salt and ice. Working there requires the best quality.
Movalube also significantly increases the service life of level lifting devices and 0 devices and reduces their need for repair. In this case, the necessary additional parts are added to the Movalube and the Level Lifter is lubricated together with the rear lift.
Movalube systems are used in many earthmoving and gravel trucks as well as general cargo cranes and pallet trucks. Movalube makes it easier for the owner and user to worry about the condition of their equipment, because greasing is done automatically and does not have to be done manually. Manual lubrication is first of all difficult, but also it is often forgotten.
Especially in earthmoving and gravel trucks built for large masses, the joints are hard both in the platform structure and in the chassis.
Automatic and regular lubrication is important to avoid expensive repairs and maintenance interruptions.
Movalube greases are installed on both excavators and wheel loaders. Movalube takes care of the lubrication automatically, so the earthmoving machines stay in good condition and there is no need to worry about lubrication.
The Movalube central lubrication system is always designed for earthmoving machines on a case-by-case basis. The design is influenced by e.g. the total number of nipples to be lubricated and the work cycles of different work movements.
In excavators, Movarasvari has proven to be an absolutely useful accessory. Excavators are work machines that work with very high stress and the number of repetitions is high. The number of joints is also numerous. This means a lot of work to perform the greasing. Movalube is a Conscientious and excellent worker to handle the lubrication task.
In earthmoving trucks, Movalube is usually placed next to the hydraulic tank and the hoses are routed along the hydraulic hoses.
In earthmoving vehicles, an essential part of the lubrication is the platform axles, where the platform is attached to the hydraulic cylinders.
Installing Movalube in an earthmoving car ensures safe use of cars without high maintenance costs. Pin repairs and cylinder eye wear are expensive and time-consuming work.
An automatic lubricator supplies lubricant evenly to Dolly's large swivel bearing, draw table and lock. The bearing, drawbar and lock remain lubricated in the dolly trailer at all times.
The device pumps new grease to the bearing and draw table, every time the trailer turns the dolly. The Mova-dolly takes its driving force and does its work every time the draw table turns.
The operational reliability of the Mova system is guaranteed by full hydraulics. Does not contain electricity at all. The absence of electricity enables the device to be classified as completely explosion-proof. So installing Movalube does not affect the car's safety ratings. The Dolly trailer itself has no electricity or hydraulics.